|
FINEfoam140 |
|
|
|
Welcome to Wanjoo Metals |
HOME > PRODUCT > Insulation |
|
|
|
|
|
|
|
The FINEfoam140, CFC-free polyisocyanurate (PIR), is produced as |
a continuous foam bunstock with the ability to be fabricated into any |
shape and sizes such as sheets, pipe shells, tank and vessel |
coverings and custom parts for a variety of insulation, core material |
and carving applications. While retaining all of the benefits of rigid |
polyurethane insulation, FINEfoam140 offers greater dimensional |
stability over a wider service temperature range. |
|
|
|
|
|
|
BENEFITS AND ADVANTAGES |
Closed cell structure enabling excellent moisture resistance |
Improved dimensional stability |
Outstanding insulating value |
Low thermal conductivity |
Rigid, lightweight and strong |
Easy to fabricate into virtually any shape & size |
Superior compatibility with polyester and epoxy resins |
|
MAJOR APPLICATIONS |
FINEfoam140 may be used for such applications operating within the temperature range -170¡É to +120¡É (-274¢µ to +248¢µ ). |
It is designed for use in a wide range of applications including : |
|
Oil refinery & Petrochemical plant |
LPG/LNG Gas & Cryogenic Plant |
LPG/LNG Carrier |
LPG/LNG Receiving Terminals |
Ethylene/Ammonia Production Plant |
Cryogenic pipework and equipment |
Cold Storage & HVAC Applications |
|
MOISTURE RESISTANCE |
Moisture penetration can degrade thermal insulating performance. Since FINEform140 has high- closed cell content and |
consists of strongly-linked matrix, it does not easily break down in service and shows excellent resistance to moisture |
penetration. When used with proper installation of vapor barriers, FINEfoam140 provides further improved performance to |
its insulating system. |
|
THERMAL EFFICIENCY |
FINEfoam140 has a fully aged thermal conductivity as low as 0.023 W/mk. (Min. six months aging) Thus it can achieve the |
same insulating value with a minimal thickness of insulation even in most severe operating conditions. Less insulation can |
facilitate thinner walls, more space, and fewer and tighter energy-losing seams. Therefore FINEfoam140 insulating system |
can achieve a lower surface area and cost savings of finishing materials such as expensive vapor barriers, jackets, and |
mastics. |
|
MECHANICAL PERFORMANCE |
The trimer structure of FINEfoam140 enable its insulating system to have outstanding mechanical performance and structural |
stability in service. |
|
FIRE RESISTANCE |
In accordance with the ASTM designation E84-05, Standard Method of Test for Surface Burning Characteristics of Building |
Materials, FINEfoam140 has a smoke density 250 and a flame spread 25. When exposed to fire, FINEfoam140 does not melt |
away or spread flame. Thus it may satisfy the requirement or regulations of major industrial standards of the world. |
|
PRODUCT AVAILABILITY |
FINEfoam140 is available in the forms of standard & custom blocks, flat slabs, pipe sections, pipe supports and any kind |
of fabricated shape so that it is able to meet all the requirements of installation for thermal insulation. |
|
TECHNICAL SUPPORT SERVICE |
For further information and technical advice, you are welcomed to contact our Technical Service Dept. |
|